C3725 Advsecurityk9 Mz 124.15 T14: The Latest Cisco IOS Release for 3700 Series Routers

when running in the lab router router1 ICND2 NAT Configuration Test with images ios c3725-adventerprisek9-mz.124-15.T8 or c3725-adventerprisek9-mz.124-15.T14error appears:SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!% Software-forced reload00:00:06 UTC Fri Mar January 2002: Breakpoint exception, CPU signal 5, PC = 0x60BEB674while ISP router starts normally.

The c3725 has 2 FastEthernet interfaces on its motherboard (GT96100-FE), 3 subslots for WICs (maximum of 6 serial ports) and 2 Network Module slots (maximum of 32 FastEthernet ports or 8 serial ports).

C3725 Advsecurityk9 Mz 124.15 T14

Download File

First move the bin file to /opt/unetlab/addons/dynamips directory, unzip it and give extension .image.root@eve-ng:/opt/unetlab/addons/dynamips# unzip -p c7200-advipservicesk9-mz.152-4.S5.bin > c7200-advipservicesk9-mz.152-4.S5.imageroot@eve-ng:/opt/unetlab/addons/dynamips# rm c7200-advipservicesk9-mz.152-4.S5.binroot@eve-ng:/opt/unetlab/addons/dynamips# unzip -p c3725-adventerprisek9-mz.124-15.T14.bin > c3725-adventerprisek9-mz.124-15.T14.imageroot@eve-ng:/opt/unetlab/addons/dynamips# rm c3725-adventerprisek9-mz.124-15.T14.bin

The current experiment regards CAM table overflow, and works great with a standard GNS3 switch, but when I use the c3725, the result is quite unexpected. I should be able to completely fill the CAM table on the device. However, as you can see from the following figure, it is not the case: 2ff7e9595c